Owner`s manual

31
Restoring the factory settings
the Lil’ Looper will start up in the normal way.
Note: The enabled/disabled state of the Auto
Power-O function is remembered even when you
turn o the power.
Restoring the factory settings
Here’s how to restore the Lil' Looper to its factory-set
state.
The following seings will be initialized and returned
to the seings set at the factory.
• Playback/recording operation mode
• Saved eect seing for each eect type
• Auto Recording Start function seing (sensitivity)
• Metronome seings ( volume, beat, tap tempo)
• Foot switch seing (option VOX VFS2 foot switch)
• Auto Power-O seing
1. Turnthepowero.
2. WhileholdingdowntheAUTORECbuonand
theCLEARbuon,turnthepoweron.
3. WhentheEFFECTbuonandCLEARbuon
blinks,releasethebuons.
The EFFECT buon lit-up green. The CLEAR
buon lit-up red.
4. PresstheEFFECTbuontoinitializetheprogram.
Tocanceltheoperation,presstheCLEARbuon.
When the programs have been initialized
successfully, all buons will light up green, and
then the Lil' Looper will start up in the normal way.
When the initialization is canceled, all of the
buons will light up red and the Lil’ Looper will
start up in the normal way.
Never turn o the power while initialization is
being executed.