Owner`s manual

18
VOX Lil' Looper Owner's manual
Using the metronome as a guide while you record
You can use the metronome as a guide while you
record a loop. Adjust the following seings before
you start recording.
1. PresstheTAPbuonseveraltimestospecifythe
tempo.
The metronome will sound at the tempo you specied.
The METRONOME buon will light up red.
The TAP buon will blink at the tempo you
specied.
2. Toadjustthevolumeofthemetronome,hold
downtheMETRONOMEbuonandturnthe
LOOPLEVEL/VALUEknob.
3. Tospecifythetimesignature,holddowntheTAP
buonandturntheLOOPLEVEL/VALUEknob.
The time signature is set to 4/4 when the power is
turned on.
The range of time signatures is 1/4 , 3/4, 4/4, 5/4, and 7/4.
You can’t change the denominator of the time signature.
You can’t change the time signature or tempo aer
recording.
About the metronome operation
The functionality of the metronome may vary
depending on the record/playback mode. ()p. 21 “The
recording/playback function of the Lil’ Looper”)
Whentherecord/playbackfunctionisinSyncmode
The metronome will run in sync with the loop when
recording and the metronome are on. Even if a loop is
stopped, the metronome will continue to run internally
in sync with the loop. As a result, the metronome will
synchronize with the loop the next time playback is
initiated. If the loop is deleted, the synchronization
will be canceled.
Whentherecord/playbackfunctionisinIndividual
mode
In Individual mode, the metronome will stop if the
loop is stopped. If a loop starts to record or playback,
the metronome will run from the rst beat.