Owner`s manual

JamVOX Effect guide
48
G. Reverb Effects
Here you can make settings for the reverb effect. You can choose one of fifteen types.
Parameters marked with can be controlled by an optional Korg EXP-2 foot controller connected to the JamVOX monitor.
For details on how to assign a parameter to the foot controller or foot switch, refer to “Option pedal/switch settings” (☞JamVOX owner’s manual
p. 32).
1. SLAP Mono in/Stereo out 1
This models a tiny room with a very short reverb time.
TIME [1.0...10.0]
Sets the reverb time.
LO DAMP [0.0...10.0]
Adjusts the attenuation of the low-frequency range.
HI DAMP [0.0...10.0]
Adjusts the attenuation of the high-frequency range.
PRE DELAY [0...100 ms]
Sets the initial delay before the reverberation begins. By adjusting this setting you can clarify the definition of
the original sound.
MIX [0.0...10.0]
Adjusts the mix amount of the reverb.