Owner`s manual

JamVOX Effect guide
46
10. MULTI HEAD Mono in/Mono out 1
This is a model of a tape echo unit boasting three playback heads. The echo from each head has its own feedback loop, letting you create warm and
complex “multi-tap” echo effects.
TIME [1...2000 ms]
Sets the delay time.
FEEDBACK [0.0...10.0]
Adjusts the amount of feedback.
TONE [1.0...10.0]
Adjusts the tone of the delay sound.
MODE [1, 2, 3, 4, 5]
Specifies the combination of heads that will be used.
1: Conventional echo.
2: The delayed sound produces a rhythm of “ta-ta-ta (rest).”
3: The delayed sound produces a rhythm of “ta (rest) ta-ta.”
4: The delayed sound produces a rhythm of “ta-ta (rest) ta.”
5: The delayed sound produces a rhythm of “ta-ta-ta-ta.”
MIX [0.0...10.0]
Adjusts the mix amount of the delay.