Owner`s manual

JamVOX Effect guide
44
8. SWEEP DELAY Mono in/Mono out 1
This also models the SDD-3000. Here you can use the envelope of your guitar signal to control the DELAY TIME, and by setting a short “TIME”
and raising the “FEEDBACK” you can produce a distinctive flanger effect. Even with conventional settings of “TIME,” you can produce unique
effects that would not be possible with an LFO.
TIME [26...2000 ms]
Sets the delay time.
FEEDBACK [0.0...10.0]
Adjusts the amount of feedback.
TONE [1.0...10.0]
Adjusts the tone of the delay.
SENS [0.0...10.0]
Adjusts the sensitivity at which the effect responds to the volume of your guitar.
MIX [0.0...10.0]
Adjusts the mix amount of the delay.