Owner`s manual

F. Delay Effects
41
5. HOLD DELAY Mono in/Mono out 1
This models a Korg DL8000R 24-bit digital delay set to the “hold delay” setting.
TIME [1...8000 ms]
Sets the delay time.
FEEDBACK [0.0...10.0]
Adjusts the amount of feedback.
TONE [1.0...10.0]
Adjusts the tone of the delay.
MIX [0.0...10.0]
Adjusts the mix amount of the delay.
HOLD SW [OFF, ON]
If this is ON, the delay sound will be held.
NOTE: If you select HOLD DELAY as the delay effect, HOLD DELAY (HOLD) will automatically be assigned to the optional VOX VFS-2 foot
switch connected to the JamVOX monitor. Pressing the foot switch will hold the delay sound.