Owner`s manual

F. Delay Effects

Here you can make settings for a delay effect. You can choose one of eleven types.

Parameters marked with can be controlled by an optional Korg EXP-2 foot controller connected to the JamVOX monitor.

Parameters marked with can be controlled by an optional VOX VFS-2 foot switch connected to the JamVOX monitor.

For details on how to assign a parameter to the foot controller or foot switch, refer to “Option pedal/switch settings” (☞JamVOX owner’s manual

p. 32).

1. STEREO DELAY Stereo in/Stereo out 1

This is Korg’s 24-bit digital delay, the DL8000R. With the exception of the sampling frequency and wave control of the DELAY TIME, the circuit is

essentially identical. Since this is a full-stereo design, it’s particularly effective to place it after the output of a stereo MOD or REVERB effect.

TIME [1...4000 ms]

Sets the delay time.

FEEDBACK [0.0...10.0]

Adjusts the amount of feedback.

TONE [1.0...10.0]

Adjusts the tone of the delay.

DUCKING [0.0...10.0]

Adjusts the sensitivity at which the effect will “duck” (decrease) in response to the volume of your guitar.

Ducking:

This automatically lowers the volume of the delay sound when you play your guitar loudly, allow-

ing your playing to come through.

MIX [0.0...10.0]

Adjusts the mix amount of the delay.