Owner`s manual

E. Modulation Effects
35
11. MOD DELAY Mono in/Mono out 1 (Mode=1), Mono in/Mono out 3 (Mode=2), Mono in/Stereo out 1 (Mode=3)
This models an analog delay that lets you add a vibrato effect to the delayed sound. The actual unit provided 400 ms of delay time, but this simula-
tion extends this up to 1400 ms while maintaining the same warm sound, and can also be used as a sub-delay for the DELAY section.
SPEED [0.100...10.00 Hz]
Adjusts the modulation speed.
DEPTH [0.0...10.0]
Adjusts the modulation depth.
FEEDBACK [0.0...10.0]
Adjusts the amount of feedback.
TIME [1.0...10.0]
Specifies the delay time.
MODE [1, 2, 3]
Selects the output method.
1: Mono output.
2: Stereo mode with the effect sound from the right and dry sound from the left.
3: Reverse-phase stereo mode with dry + effect in the left side and dry — effect in the right side.
MIX [0.0...10.0]
Adjusts the mix amount of the effect.