Owner`s manual

JamVOX Effect guide
34
10. ROTARY Mono in/Stereo out 2
This models a stereo rotary speaker. When you adjust the speed, it will take a certain amount of time for the specified speed to be reached — just
like on an actual rotary speaker. This is because it takes several seconds for the motor that creates the rotation to accelerate or decelerate.
SPEED1 [0.80...10.0 Hz]
Adjusts the rotational speed of the speaker.
DEPTH [0.0...10.00]
Adjusts the modulation depth.
SPEED2 [0.80...10.0 Hz]
Adjusts the rotational speed of the speaker.
ACCEL [1.0...10.0]
Adjusts the time it takes for the rotational speed to change. With higher settings, the change will take more
time.
SPEED SW [SPEED1, SPEED2]
Switches the speaker’s rotation speeds (“SPEED1” and “SPEED2”).
NOTE: If “ROTARY (SPEED SW)” is assigned to an optional VOX VFS-2 foot switch, you’ll be able to switch between “SPEED1” and “SPEED2”
by pressing the foot switch. (See JamVOX owner’s manual “Option pedal/switch settings” on page 32)