Owner`s manual

JamVOX Effect guide
28
4. BI CHORUS Mono in/Mono out 1 (Mode=SERIAL), Stereo in/Stereo out 1 (Mode=PARA1, PARA2, PARA3)
This is a chorus model unique to VOX. It provides two chorus units, CHORUS 1 and CHORUS 2, and lets you connect the two units not only in
series or in parallel, but also to synchronize or de-synchronize the two LFOs. It produces a variety of tones that cover a range from wonderfully
spacious sounds to bizarre flanger-like sounds with complex modulation.
SPEED1 [0.100...10.00 Hz]
Adjusts the modulation speed of CHORUS 1.
DEPTH [0.0...10.0]
Adjusts the modulation depth of CHORUS 1/2.
RESONANCE [0.0...10.0]
Adjusts the amount of resonance for CHORUS 1/2.
SPEED2 [0.100...10.00 Hz]
Adjusts the modulation speed of CHORUS 2.
NOTE: This will not function if “MODE” is set to PARA2 or “PARA3.
MODE [SERIAL, PARA1, PARA2, PARA3]
Specifies the connection and LFO for CHORUS 1/2.
SERIAL: CHORUS 1/2 are connected in series.
PARA1: CHORUS 1/2 are connected in parallel (Stereo mode).
PARA2: CHORUS 1/2 are connected in parallel, and their LFOs are synchronized.
PARA3 : CHORUS 1/2 are connected in parallel, and their LFOs are synchronized in opposite phase (Stereo mode).
NOTE: If PARA2 or PARA3 is selected, the speed is adjusted by the “SPEED 1”.
MIX [0.0...10.0]
Adjusts the mix amount of the effect sound.