User Manual

7
Owner’s manual
REARPANELLAYOUT
4 5 6
1
2 3 7
1. MAINS INPUT – Connectyourelectricityherewiththesupplied,detachablemains(power)cord.
2. 8 Ohm Speaker Jacks ThisisusedtoconnecttheNightTraintoany8ohmcabinetor2x16ohm
cabinets.
3. 16 Ohm Speaker Jack – ThisisusedtoconnecttheNightTraintoany16ohmcabinet.
WARNING ! Always use a non-screened VOX approved speaker lead with the Night Train
amplifierandcabinet.
WARNING ! Please ensure that your amplifier is connected to the correct mains power
voltage—pleasechecktherearpanelratingplate.Ifindoubtconsultdealer.
WARNING ! NEVER operate this amplifier without the loudspeaker load being connected.
Seriousdamagecanoccurotherwise.
WARNING ! Thisamplifiermustalwaysbeearthed(grounded)topreventtheriskofelectrical
shock.
4. FX Loop Send – Connectthistotheinputofyoureffect.
5. FX Loop Return – Connectthistotheoutputofyoureffect.
6. FX Loop Bypass – PressthebuttonintocompletelybypasstheFXLoop.
7. Footswitch Jack – ConnecttheoptionalVFS2Afootswitchhere.
SPECIFICATIONS
Power Output: 50WattsRMSinto8or16ohm
Dimensions (W x H x D): 458x235x175mm/18.03x9.25x6.89inches
Weight: 12.2Kg/26.9lbs.
Included items: Powercable,owner’smanual,highqualityspeakercable
Options: VFS2Afootswitch
Specificationsandappearancearesubjecttochangewithoutnoticeforimprovement.
www.voxamps.com