User Manual

4
Installing Batteries
Remove the baery compartment cover that is located on the back of the
unit (page 7). Insert six AA-size alkaline baeries or six NiMH baeries,
observing the correct polarity orientation, as shown in the gure below.
NOTE: Baeries are not included. You will need to purchase them sepa-
rately.
NOTE: Be sure to install baeries in the correct orientation.
NOTE: Do not use dierent type baeries or baeries with dierent
power consumption levels together.
Replacing the Batteries
Replace the baeries when the power LED becomes dim.
NOTE: If the baery level becomes low, noise may be generated.
NOTE: Depleted baeries must be removed from the SOUNDBOX mini
immediately. If you leave them in, malfunctions such as baery
leakage may occur. You should also remove the baeries if you’re
not going to be using the SOUNDBOX mini for an extended pe-
riod of time.
• Features a wide function to realize spacious sound thanks to *Acoustage
technology.
*Acoustage (Virtual Surround Technology by KORG)
Korg's original and revolutionary Virtual Surround Technology allows a unique personal
acoustic space to be created. Using only a pair of stereo speakers positioned in front of
the listener, Acoustage creates unprecedented and unique spatial acoustic experiences.
Furthermore, the maximum eect is delivered because very accurate acoustic measurement
ensures optimization for each playback system.
Setup
This section describes the basic setup of your amplier.
NOTE: This manual also describes safety precautions and functions. Be
sure to read the entire manual.
1. Set the VOLUME knob and TRIM knob to the minimum level.
2. Install baeries in the amplier. Alternatively, you can connect the
included AC adapter to the DC12V jack on the rear panel, then plug
the adapter into an AC outlet.
3. Plug the cable that’s connected to your musical instrument or audio
device into the input jack on the top panel of the SOUNDBOX mini.
If you also plan to use an external audio device (CD, MP3 player,
etc.), or a microphone, connect the player to the AUX IN jack, or the
microphone to the MIC jack on the top panel.
4. Press and hold down the power buon until the power LED lights up
and the power turns on.
NOTE: When turning o the power, press and hold down the power
buon until the power LED turns o.
5. Slowly raise the VOLUME Knob to the desired level.
When using a microphone, you can adjust its volume with the TRIM
Knob.