Specifications

24
Power Management :
This is the master control of all power management functions.
The default setting is “disable” for general application.
User Defined : Allows user to set any power saving options.
Min. Saving : System enters power saving mode after
1 hour no activity.
Max. Saving : System enters power saving mode after
5 seconds no activity.
PM Control by APM :
No - Default setting
Yes - System BIOS will wait for APM prompt before it enters
any power management mode.
Note : APM Mode :
This mode is using for DOS 6.0 or higher version with
the driver POWER.EXE. The driver should be loaded
at system power-on by CONFIG.SYS file. POWER.EXE
will monitor the system status thru the BIOS APM
interface.
Video Off Option :
Susp,Stby
¡÷
Off - Screen Off when system in Suspend or
Standby mode.
Susp
¡÷
Off - Screen Off when system in Suspend mode.
All Modes
¡÷
Off - Screen Off when system in Suspend,
Standby,or Doze mode.
Alway On - System BIOS will never turn off the screen.
Video Off Method :
Blank Screen : When BIOS do the video off the screen
will be blank.
V/H Sync, + Blank : When BIOS do the video off,BIOS will turn
of the V-sync & H-sync signals from VGA