Specifications

3.2 PCI E-IDE Disk Drive Connector

You can attach two IDE( Integrated Device Electronics) hard disk

drives to the SSC-5x86H internal controller.

• CN1: IDE Interface Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 RESET# 2 GROUND

3 DATA 7 4 DATA 8

5 DATA 6 6 DATA 9

7 DATA 5 8 DATA 10

9 DATA 4 10 DATA 11

11 DATA 3 12 DATA 12

13 DATA 2 14 DATA 13

15 DATA 1 16 DATA 14

17 DATA 0 18 DATA 15

19 GROUND 20 N/C

21 N/C 22 GROUND

23 IOW# 24 GROUND

25 IOR# 26 GROUND

27 N/C 28 BALE - DEFAULT

29 N/C 30 GROUND - DEFAULT

31 INTERRUPT 32 IOCS16#-DEFAULT

33 SA1 34 N/C

35 SA0 36 SA2

37 HDC CS0# 38 HDC CS1#

39 HDD ACTIVE# 40 GROUND

3.3 Parallel Port

This port is usually connected to a printer, The SSC-5x86H includes

an on-board parallel port, accessed through a 26-pin flat-cable

connector CN9.

• CN9 : Parallel Port Connector

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 STROBE# 2 DATA 0

3 DATA 1 4 DATA 2

5 DATA 3 6 DATA 4

7 DATA 5 8 DATA 6

9 DATA 7 10 ACKNOWLEDGE

11 BUSY 12 PAPER EMPTY

13 PRINTER SELECT 14 AUTO FORM FEED #

15 ERROR# 16 INITIALIZE