User`s manual

~12~
˙You can navigate through the active ports by using the arrow keys. The OSD menu
will only allow you to move to active ports.
NOTE: If a computer is connected and is powered up, but the OSD menu does not
display a “®”, you will have to RESET the KVM 08KD to re-detected the powered
computers. This is done by simultaneously pressing the AUTO and SELECT
buttons on the front panel.
˙Pressing the INSERT key allows you to rename the port. Press ENTER to complete.
NOTE: Inadvertently pressing the will erase any
given names on the OSD menu and restore its initial settings.
˙Pressing the ESC key exits the current screen.
˙Once you have selected a computer on the menu, press ENTER to switch to that port.
˙Pressing the TAB key opens up the Function menu. In this menu, you can select the
SCAN TIME and DISPLAY TIME.
SCAN TIME:
Amount of time the KVM
08KD stays one
port before switching to the next port when
in Scan Mode
DISPLAY TIME:
Amount of time the OSD Menu or Port
Name remains displayed on-
screen after
making a port selection
SCAN TIME:
DISPLAY TIME:
7sec 15sec 30sec 60sec
7sec 15sec
30sec 60sec
[ ]: SELECT
(INS): RENAME
(Enter): COMPLETE
(Esc): Exit
SCROLL
LOCK
SCROLL
LOCK
Del