User`s manual

~ 11 ~
AutoScan Mode
In AutoScan mode, KVM 08KD remains on one channel for a number of seconds, before
switching to the next. This time interval is set in the On-Screen Display menu.
NOTE: There is no mouse or keyboard control in this mode. This is necessary to
prevent errors. Otherwise, if the user is moving the mouse or using the
keyboard when KVM08KD switches to the next channel, data flow is interrupted
and will cause erratic mouse movement and / or the wrong characters to show up
when using the keyboard.
To get out of AutoScan mode, press any key.
Channel On-Screen Display Menu Control
To get into the On-Screen Display (OSD) menu, press SCROLL LOCK, SCROLL LOCK,
SPACE BAR. Immediately, the OSD overlay screen appears. This screen is generated
by the KVM08KD, and does not affect your computers or running software in any way.
Enable AutoScan mode
SCROLL
LOCK
SCROLL
LOCK
0
Enable On-Screen Display Menu
SCROLL
LOCK
SCROLL
LOCK
Space Bar
T
he main OSD screen menu
is shown on the right.
The current selected port is
shown in RED.
A “®
” indicates that the
computer connected to that
port is powered up.
KVM08KD OSD
1. CHANNEL 1
2. CHANNEL 2
3. CHANNEL 3
4. CHANNEL 4
5. CHANNEL 5
6. CHANNEL 6
7. CHANNEL 7
8. CHANNEL 8
(TAB): FUNCTION/HELP
:PgUp :PgDn
®
®
®
®
“®” indicates
PC is powered
Currently
selected
Port is in
Red