User`s manual

~ 10 ~

OPERATION

Selecting which computer to operate can be done either by On-Screen Display, the select

button, or through keyboard “Hot Key” commands. You will notice that after the

KVM 08KD switches to another computer, the mouse will be inoperative for about 1-2

seconds. This is normal operation and ensures that proper mouse synchronization is

established.

Pressing the “Select” button cycles you through all the ports, including inactive ports.

Pressing the “AUTO” button cycles all active ports automatically.

You can reset KVM 08KD to re-detect active ports by simultaneously pressing ATUO and

SELECT buttons on the front panel.

Keyboard “Hot Key” Commands

You can also conveniently command the KVM08KD to switch ports (channel) through

simple keyboard key sequences. To send commands to the KVM08KD, the SCROLL

LOCK key must be pressed twice within 2 seconds. You will hear a beep for

confirmation. Below are the different commands.

CHAPTER 3.

1 2 3 4 5 6 7 8

Switch to Previous Active port

SCROLL

LOCK

SCROLL

LOCK

Switch to Next Active port

SCROLL

LOCK

SCROLL

LOCK

Directly switches to port X

X=1 to 8

SCROLL

LOCK

SCROLL

LOCK