User`s manual

OPERATION
~ 14 ~
On-Screen Display Menu Control
To get into the On-Screen Display (OSD) menu, press SCROLL LOCK, SCROLL LOCK,
SPACE BAR. Immediately, the OSD overlay screen appears. This screen is generated
by the KVM08, and does not affect your computers or running software in any way.
˙You can navigate through the active ports by using the arrow keys. The OSD menu
will only allow you to move to active ports.
NOTE: If a computer is connected and is powered up, but the OSD menu does not
display a “®”, you will have to RESET the KVM 08 to re-detected the powered
computers. This is done by simultaneously pressing the Bank/SCAN and
Channel buttons on the front panel.
˙Pressing the INSERT key allows you to rename the port. Press ENTER to complete.
NOTE: Inadvertently pressing the SCROLL LOCK, SCROLL LOCK, DELETE keys will
erase any given names on the OSD menu.
Enable On-Screen Display Menu
SCROLL
LOCK
SCROLL
LOCK
Space Bar
The main OSD screen menu
is shown on the right. It
shows the currently selected
BANK. If you have only
one KVM
08, it will say
“BANK 0”.
The current selected port is
shown in RED.
A “®
” indicates that the
computer connected to that
port is powered up.
KVM 08 OSD
1. CHANNEL 1
2. CHANNEL 2
3. CHANNEL 3
4. CHANNEL 4
5. CHANNEL 5
6. CHANNEL 6
7. CHANNEL 7
8. CHANNEL 8
BANK 0
(TAB): FUNCTION/HELP
:PgUp :PgDn
®
®
®
®
“®” indicates
PC is powered
Currently
selected
Port is in
Red
Currently
selected
Bank
Address