User`s manual

INSTALLATION

~ 9 ~

Step 8

Connect the first computer’s keyboard cable to the KVM 08. Using another PS/2 cable

connect one end to PS/2 keyboard port on the computer, and the other end to the PC1

keyboard port on the back of KVM08. If your computer has an AT type keyboard port,

you will need a PS/2 to AT keyboard adapter.

ON/OFF

SWPC8PC7

90-240VAC

LINE

PC6PC5PC4PC3Console PC2PC1

Input Input /Slave Master

Slave Input

Step 9

Double-check all of the connections. Make sure the keyboard and mouse cables go to

the correct ports.

Step 10

Repeat step 6 to 8 for the remainder of the computers.

Step 11

Attach the power supply to the power jack at the back of KVM08. Plug this into

available AC outlet. Flip the power switch on the front panel. You should see the LED

for channel 1 on the front panel blink, and hear a beep. Power up your monitor.

Step 12

You can now power up all your computer simultaneously. The first computer will show

up on the monitor. Check to see if the keyboard, mouse and monitor work. If this is

okay, press the “Channel” button and check the functionality of the other computers. If

you find any errors, double-check all of the cable connections.

Note: Avoid pressing any keys on the keyboard or moving the mouse is the

currently selected port has a computer that is in the process of booting up.

This may cause the computer to not detect, or initialize the keyboard or

mouse drivers properly.

Back of PC