User`s manual
INSTALLATION
~ 5 ~
2.2 S
INGLE
U
NIT OR
D
AISY
-
CHAIN
O
PERATION
KVM08 has the capability to be Daisy-Chained to 15 more units (for a total of 16), giving
the user control over a maximum of 128 computers.
Each KVM 08 unit is defined as a “BANK”. See the following diagram for more
information. BANK numbers range from 0 to F (Hexadecimal), for a total of 16 banks.
BANK 0 is the MASTER bank while BANK 1 through F are SLAVE banks. The
MASTER bank is the unit that connects to the console keyboard, mouse and monitor.
The DIP-switch on the rear panel must be set correctly for proper identification and usage.
See the next section for the actual settings. If you are using KVM 08 in a single unit
configuration, it must be set as the MASTER (BANK 0). If it is to be used as a
SLAVE unit, then it must be set to any unused unique bank number from 1 through
F.
1 3 2 4 5 6 7 8
Bank 0 (Master)
9 11 10 12 13 14 15 16
Bank 1 (Slave)
17 19 18 20 21 22 23 24
Bank 2 (Slave)
121
123
122 124
125 126
127
128
Bank F (Slave)
etc…
etc…
CONSOLE
Keyboard,
mouse and
monitor