User Manual
Trouble shooting:
NO.
Troubles
Solution
1
The machine doesn't work
·Check if the plug is in good contact with the
socket.
·Check if the rise button spring back in place.
·Check if the machine works continuously more
than 6 minutes, and wait until the motor cool
down.
2
Noise in the mixing bowl when
working (the accessory scraped
the bowl)
·Check if the mixing bowl is properly installed.
·Check if the accessory installed properly on
machine.
3
The pot cover doesn’t fit the
mixing bowl properly
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl installed properly on
machine and locked correctly.
4
The machine doesn’t work on
certain speed
·Check if the mark on speed knob corresponds
to the speed silkscreen on housing.
·Rotate speed knob to 0 , and re-check if the
machine works .
5
Movements when the machine
working
·Check if the anti-slip feet fall off.
·Check if the machine is placed on a smooth and
flat tabletop.
6
The rise button didn’t spring back
in place after installing the mixing
bowl and pot cover
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl is properly installed.
Warm Tips about stop working :
1. The Vospeed Stand Mixer has a safety protection function that prevents hazards from developing in
the event of a fault. If the machine stops automatically during use, please unplug the power, turn the
knob to "0", wait for 20-30 minutes before plugging in. Turn on the power and control the knob to
another speed that the machine will work again.
2. First, you should use 1 speed to stir the flour for about 30 seconds, then 2 speed to stir the flour and
water for about 30 seconds, after that use 3 speed to stir the flour for 4 to 5 minutes. Finally, turn the
knob to "0" position. It will be overloaded or overheating causes damage when you always quickly use
other vigorously speeds.
3. It is recommended that you use the machine no more than ten minutes each time. With heavy
mixtures, do not operate the machine for more than six minutes, and then allow it to cool down for a
further ten minutes.