User guide

 EB 360
Assembly & Use
on carpets and mattresses
FIGURE 3
Assembling & Disassembling
Simply insert the Kobold VK 140 into the
joint nozzle of the Electronic Brush until it
clicks into place.
(FIGURE 3)
Both devices are now ready for operation.
In order to take off the accessories, pull the
remote release
(FIGURE 4, DETAIL A) or press
the release button
(FIGURE 4, DETAIL B) on
the lower end of the Kobold VK 140 and
remove the accessory part.
 Always switch off the appliance and
remove the plug from the mains socket
before changing any electrical accessories.
 Do not insert pointed objects into
the electrical contacts! Do not tamper with
the contacts.
 Stay away from rotating brushes
of the electronic brush.
To change the brushes, proceed
as follows: remove the plug from
the mains supply, open the cowling
on the EB 360 by pressing the yellow
button. The cowling releases and can be
pushed forward with ease.
(FIGURE 5)
FIGURE 4
DETAIL A
DETAIL B
 EB 360
Technical specifications
EB 360
51
EB 360
50
Technical specifications
Appliance usable exclusively when connected to Kobold appliances
Connects to the Kobold through a practical connection system.
Voltage 220 -240 V / 50 Hz
Power absorption 100W
Motor Motor maintenance free DC-motor
with toothed belt drive
Brushes Rotary, interchangeable and replaceable
Working surface area 300 mm
Skirting-brush distance 0 cm
for cleaning against walls, right, left and frontal
Brush speed
Bristle and mattress ca 6200 rpm
“Soft” function brush speed
ca 800 rpm
Brush height adjustment Automatic
Refreshing Kit speed ca 1700 rpm
Height ca 59 mm
Weight 1.60 kg
Noise emission 78 dB with VK 140 system
(measured on carpet floor in ideal conditions)
Protection level IPX 0
The identification details of the product are on the label on the rear side
of the appliance.
The manufacturer reserves the right to make any changes suggested by
developing technology, at any time and without prior notice.
Assembly & Use
FIGURA 5