User guide

39
VK 140
38
With the integrated grip handles, you can
comfortably transport the Kobold VK 140,
use it on stairs and mattresses, and clean
raised areas throughout the home.
(FIGURE 8)
Furthermore, the Kobold VK 140 allows you
to adjust the working length by means of
the telescoping rod handle.
For telescoping, hold down the telescoping
notch, slide the rod handle into the desired
position and let it snap in.
For storage of the appliance or for working
in raised areas, you can slide the rod handle
completely into the appliance.
(FIGURE 9)
Through the connection system, the Kobold
VK 140 can be connected to the EB 360, the
Pulilux PL 515, the Polsterboy PB420, the
suction hoses and the respective accessories.
Thus you can select the best combination
of appliances for each application.
(FIGURE 10)
 Handling and telescoping
the Kobold VK 140
FIGURE 8
FIGURE 9
FIGURE 10
 Making the appliance
ready for operation
Remove the mains cord from the cable
holder by turning downwards. Insert the
plug into the wall outlet.
(FIGURE 11)
In order to avoid damage on furniture,
always fold the lower hook inwards when
you work with the Kobold VK 140.
(FIGURE 12)
Switching on and off
This is done with the sliding switch on the
handle, with which you can also set the
desired suction performance power.
The sliding switch makes sure that you can
easily and safely select one of the power
performance settings.
Select the desired power performance
setting between
(FIGURE 13):
“A” - automatic level (with EB 360)
“” - lower suction power
“” - mid suction power
“” - higher suction power
With the level A the EB 360 automatically
adjust the suction power of the Kobold
VK 140 to the different floor types.
For all other accessories and motors the
level A gives a suction power equal to 1 to
the Kobold VK 140.
The Kobold VK 140 is also equipped with a
secondary switch located on the back side
of the appliance.
(FIGURE 14)
It is possible to operate trough the
secondary switch doing the raised cleaning
areas with the carrying strap.
The motors connected to the Kobold VK 140
switches itself on and off automatically.
FIGURE 11
FIGURE 14
FIGURE 12
FIGURE 13
Assembly & Use Assembly & Use
VK 140