User guide

For quick and easy cleaning of hard floors,
waxed floors, parquet or ceramic tiles
where an effective, manageable electric
broom is needed, use the HD 40; connected
to the Kobold VK 140, it is extremely agile
on all kinds of floors.
The HD 40 is a revolutionary cleaning
nozzle that swivels with an exclusive
oscillating motion and allows access to all
surface areas, even the most inaccessible,
and gets round all kinds of obstacles with
ease.
Another important feature of the new
HD 40 is that, despite the exceptional
suction power, it is surprisingly easy to
handle and manoeuvre.
The elegant shape of the HD 40 suits
perfectly with the Kobold VK 140 design.
(FIGURE 3)
HD 40 Features
Swivelling joint for greater flexibility
Oscillating motion to get into difficult
corners and around obstacles
Interchangeable brush plates
Crash and scratchproof material
Casters for easy transport and use
Parking position
Advantages
Lighter and even more practical
Easier to push
Reaches inaccessible places (tight
corners, deep under furniture, around table
legs, etc., ...)
Easier to use
Easier to transport
FIGURE 3
VK 140
19
VK 140
18
Kobold VK 140 with HD 40
Technical specifications
Technical specifications
Housing High-grade recyclable plastic
Motor Maintenance-free switched reluctance motor,
ball-bearing, electronic performance control,
nominal speed 60,000 rpm
Ventilator Single-stage radial fan
Voltage for 220-240 VAC 50/60 Hz
nominal performance 900 watts,
with additional devices max. 1,300 watts,
action radius 7.0 m in accordance with IEC 60 312
Suction values (average) for complete appliance without nozzle
max. negative pressure 175 hPa
max. air flow 41 l/s
max. suction performance 260 watts complete with clean filter system
(in accordance with IEC 60 312)
max. efficiency 32%
Filter bag volume 2.5 l in accordance with IEC 60 312
Dust emission Ca. 0.0001 mg/m
3
in accordance with IEC 60 312
Noise emission 74 dBA without nozzle
Weight approx. 3.00 kg for the appliance without nozzle
Certifications TÜV “suitable for allergy sufferers”
HEPA class 11
Protection level IPX 0
The identification details of the product are on the label on the rear side
of the appliance.
The manufacturer reserves the right to make any changes suggested by
developing technology, at any time and without prior notice.
Technical specifications