Specifications

VTK-6800 RGB Triple mode specification
2.4G/Bluetooth pairing table
Fn
+
PgUp
=
Bluetooth 1
PgDn
Bluetooth 2
End
Bluetooth 3
Home
Pairing
Guide：
Bluetooth switch on, press Fn + Home to pair, LED_A is on blue steady, hit
directly press any of the three Bluetooth buttons to start pairing (the LED_A
flashes Blue light and the device will show “KBT68” click OK to connect);
pairing completed, the LED_A goes out
1、 The power switch switches the device, the LED_A indicator flashes once,
indicating that the battery compartment is powered normally; (Blue for
Bluetooth, Green for 2.4G)
2、 When the Bluetooth/2.4G is turned on and paired, the LED_A Blue/Green
flashes at 3Hz; if it is not connected for 3 minutes, it will be stopped
3、 Low power: 2.2V low power alert (LED_A red, 1-second flashing indication)
4、 When the power switch is turned from OFF to ON, It will remember the
wireless device before OFF
5、 In 2.4G/Bluetooth mode, do not operate the keyboard for 1 minute, the
lighted indicator will be off, press any key to light up,
There can be without delay in the keystrokes, and the Bluetooth will go to sleep if
you do not operate the keyboard for 30 minutes。
When the indicator light is off, the power consumption is as follows:
1、 Working current：9mA release the key for 1 minute to enter standby
2、 Standby current：0.4-1mA standby for 30 minutes and enter hibernation
3、 Sleep current：50uA