User`s guide

VORTEX OUTPUT WIRING

BALANCED INPUT

Connect the Positive conductor of the Vortex device to Pin 2 of the XLR connector, the Negative conductor

of the Vortex device to Pin 3 of the XLR connector, and the Shield of the cable to the only to the Vortex

device. Refer to Cable Drawing 1 in the Vortex Output Wiring section of the Appendix.

UNBALANCED INPUT

Connect the Positive conductor of the Vortex device to the Tip of the RCA connector and the Negative

conductor of the Vortex device to Shield of the RCA connector. The shield of the cable is not connected at

the unbalanced end. Refer to Cable Drawing 2 in the Vortex Output Wiring section of the Appendix.

9.) SETTING THE GAIN OF THE VORTEX DEVICE