User`s guide

signals to the Vortex as well as to make wideband audio calls. The default settings for the SoundStation
VTX 1000 will not allow one to send and receive audio from the VTX into the Vortex. We will discuss how
to setup the Vortex device in Step 10.
You must perform this step; otherwise, you will not be able to operate the SoundStation
VTX 1000 properly.
Enable Vortex Mode in the SoundStation VTX 1000. Press the M
ENU key and the select ADMIN SETUP. Once
you are in the A
DMIN SETUP sub-menu, select PHONE SYSTEM and then select VORTEX MODE. To enable the
V
ORTEX MODE, select ON and then select SAVE.
23