User manual

4
5 Commands
Head
shaking
5.1 Operating mode “continuous”
ON
OFF
Picture 3
Power on
LED
Power ON/OFF
1 – Mode “touch ”
0 – Switch
OFF
2 – Mode “continuous”
Adjustment
knob
• Ensure that the knob for adjusting the speed of agitation
is positioned to a minimum. Place the instrument on a
stable surface and connect it to the mains.
• Set the main switch to the ON position to the left. The
Power LED lights up and the unit begins to operate in
"continuous" mode.
• Turn the control knob until the desired speed is set.
• To switch off, switch the master switch in the middle
position (OFF). The LED turns off and the power is off.
Picture 2