User manual

2
1. Safety instructions
• Read the instructions carefully before
use
• Ensure that only qualified personnel
using this tool
• Do not heat flammable or highly
volatile substances
• Before use, make sure the instrument
is connected to an outlet with a ground
connection.
• At work, employees shall prevent the risk of:
- Spillage of liquids.
- Mechanical vibrations that may cause breakage of
glass containers.
• Place the instrument in a suitable area, on a stable,
clean, non-slip, dry and fireproof. Do not use the tool in
explosive atmospheres, contenenenti hazardous
substances or under running water.
• Increase gradually the stirring speed and reduce
immediately if:
- The sample comes out of the tube because the speed is
set too high.
- The tool does not behave properly or moves on the
ground.
• The instrument is only guaranteed when used with
appropriate accessories.
• The accessories must be firmly attached to the
instrument.
• Check the condition of the instrument and accessories
before every use. Not utilizarli if damaged.
• Connect the equipment into an outlet having the
characteristics of voltage and frequency indicated and
ground safety.
• Protect the unit from dropping or knocks.
• Do not groped to open the instrument. It can only be
opened by qualified personnel.