User's Manual

Install Battery

Open the battery compartment and

install the CR2 battery included with

the Fury

HD 5000.

Install battery with positive side

facing in.

Power Up

To power up the Fury and prepare for ranging, press and

release the Measure button. The HCD or LOS ranging

screen will display. The Fury will power down automatically

after ten seconds of non-use.

Low Battery Icon

The low battery icon comes on at 25%

and stays on until there is no power.

Properly focus the rangeﬁnder display

This process is similar to focusing the binocular.

1. Power up the binocular and close your left eye.

2. View the rangeﬁnder display with your right eye.

3. Use the reticle focus adjustment ring to bring the

display into sharp focus.

Once this is done you will not have to refocus the rangeﬁnder

display again.

–