Manualshelf

User's Manual

ManualsBrandsVortex ManualsLaser Rangefinders10x42 Fury 5000 HD Gen II Laser Rangefinder Binocular
12345678910
10
No Range
Returned
Setting Target Modes
Press the Measure button to toggle between the Best and
Last displays. Press the Menu button to save your desired
choice and move back to the HCD/LOS selection screen.
To exit Mode Selection and save settings, press and hold
the Menu button for four seconds. Settings will also save
when Fury powers down automatically.
RANGING
With the Fury
®
HD 5000 powered up,
position the reticle on the target object
and press and release the Measure
button to get the distance measurement.
If the laser is not able to range due to
the reflectivity of the target, you will see
a display similar to that shown here. To
range a new target, simply re-aim and
press the Measure button again.