User's Manual

Issue 2.0
TimeLord Master Clocks
Operating and Installation Instructions
2-2
5 - Connecting third-party equipment using EBU and IRIG.
For further information on connecting a TimeLord with EBU-OUT to other equipment using EBU timecode see pages 11-1 and 11-2.
For further information on connecting a TimeLord with IRIG-OUT option to equipment using IRIG timecode see page 10-1.
8 - Apply power and set time on TimeLord.
See page 3-1 for information on connecting the Master
clock to the mains power
system. See pages 2-4, 2-5 and 2-6 for information on programming the time.
6 - Connecting the TimeLord-Net to an Ethernet network.
7 - Connecting Impulse slave clocks.
For further information on connecting a TimeLord-Net Clock to an Ethernet network see chapter 9.
For further information on connecting a TimeLord with -02 interface to Impulse slave clocks see chapter 12.