User's Manual

TimeLord Master Clocks
Operating and Installation Instructions
Issue 2.0 7-5
Serial Setting Mode
Normal time display
Function ‘Time Setting Mode’.
‘^’ to select, ‘+’ or ‘-’ to change.
Function ‘Serial Mode’. Press ‘^’
to select.
Serial Mode with serial type
flashing. Use ‘+’ and ‘-’ to select.
Baud rate selected, with current
setting flashing.
Data bits selected, with current
setting flashing.
Parity selected, with current
setting flashing.
Stop bits selected, with current
setting flashing.
Serial repeat selected, with
current setting flashing.
Normal time display
‘+’ and ‘-’ change the selected
serial output message.
‘+’ and ‘-’ changes the data bits. ‘PRESET’
indicates the setting cannot be changed.
‘+’ and ‘-’ changes the parity. ‘PRESET’
indicates the setting cannot be changed.
‘+’ and ‘-’ changes the stop bits. ‘PRESET’
indicates the setting cannot be changed.
‘+’ and ‘-’ changes the repeat rate. ‘PRESET’
indicates the setting cannot be changed.
‘+’ and ‘-’ change the baud rate. ‘PRESET’
indicates the setting cannot be changed.
Message time offset with messgage
referenced to current location setting.
‘+’ and ‘-’ changes the message to output
time referenced to UTC.