User's Manual

Issue 2.0
TimeLord Master Clocks
Operating and Installation Instructions
4 - Location Setup
The TimeLord Master Clock provides advanced time zone
functionality. Regardless of time synchronisation source, the
TimeLord can be used to provide time and date information
referenced to UTC, user ‘local’ time or other custom time zone.
Incorporating ‘Set Once’ technology, the TimeLord will
automatically calculate future seasonal time changes for all 64
of the preset time location code settings.
Setting the location
For installations where the output of the TimeLord is to be
referenced to UTC / GMT, the location code should be set to 00.
For installations where the output of the TimeLord is to be
referenced to the ‘local’ time zone, select the appropriate
location code from the table opposite. (eg. For a unit installed
in Birmingham, England, where ‘local’ time output is required,
location code 01 should be used.)
User Programmable Time Zone
For time-offsets and daylight saving time change dates not
covered by the location codes on page 4-2, a user
programmable time zone is provided. Information regarding
the time offset from UTC and any daylight saving change rules
may be input via a 12 digit code.
Please contact our technical department for further information
regarding this function.
4-1
Normal time display
Function ‘Time Setting Mode’. Press ‘+’
to move to ‘Location Setting Mode’.
Function ‘Location Setting Mode’. Press
‘^’ to select.
‘Location Setting Mode’ selected, with
current location flashing. Use ‘+’ and
‘-’ to select the required location from
the table on page 4-2.
Press ‘^’ to store the new location
setting and return to normal time
display.
Normal time display.