Manual

P/N: 4FR020-010

23AUG04 86-93 4V Mus. Cobra(4FR v3.1)

P/N: 4FR020-010

23AUG04 86-93 4V Mus. Cobra(4FR v3.1)

8. MAIN BRACKET ASSEMBLY/DRIVE BELT

A. Attach the supplied 1/8" NPT x 45° are tting

and oil feed hose to the oil feed tting on the su-

percharger. Rotate the tting so that it points for-

ward, toward the volute side of the supercharger,

perpendicular to the front cover. When tightening

tting, use a 1/2" wrench on the oil feed base for

support.

B. Slide the supplied 1/2" oil drain hose onto the

supercharger drain and secure with a #8 hose

clamp.

C. Using the supplied 3/8-16 x 1.75, 2.25 bolts and

3/8" AN washers, secure the supercharger to the

Vortech aluminum mounting bracket. (See Figs.

8-a, 8-b.) Do not overtighten bolts.

WARNING: When threading the 1/8" NPT x 45° are

tting into the supercharger, use engine

oil on the pipe threads for lubrication.

Teon tape, paste or other sealant is not

recommended as it might loosen and

cause blockage of the oil feed orice,

resulting in supercharger failure.

Fig. 8-b

Fig. 8-a