Use and Care Manual

24
Español
Su circulador torre remoto incluye (1) moneda estilo 3V CR2032 batería.
La batería viene preinstalada. Retire la lengüeta de la batería antes del
primer uso.
Se espera que la batería preinstalada dure un año (según
el uso) después de quitar la lengüeta del control remoto.
1. Para cambiar la pila, el control remoto lleva una pila CR2032 de 3
voltios de tipo moneda. Siempre use el tamaño y la clasifi cación
correctos de pila para este producto.
2. Para cambiar la pila, abra la tapa del compartimiento de la pila en
la parte posterior del control remoto (deberá afl ojar el pequeño
tornillo de la tapa del compartimiento con un destornillador Phillips
N.º 1). Si fuese necesario, limpie los contactos de la pila y también
los del dispositivo antes de colocar la pila. Quite el protector
plástico de la pila y colóquela en el control remoto con el lado +
hacia afuera. Asegúrese de colocar correctamente la pila en relación
con la polaridad. Coloque la tapa del compartimiento de la pila
y atornille.
Nota: Quite la pila del control remoto cuando no lo usará durante
un periodo prolongado de tiempo y siempre quite la pila agotada
inmediatamente y reemplácela por una pila nueva. No guarde la pila
agotada en el control remoto.
1. Toque para encender.
2. Seleccione la velocidad deseada presionando .
3. Presione para activar el temporizador.
4. Para ajustar la confi guración del temporizador, presione .
5. Para cancelar el temporizador, recorra los ajustes del temporizador
hasta que se apague.
6. Presione para activar y desactivar Oscilación.
CONTROL REMOTO
FUNCIONES REMOTAS CAMBIO DE BATERÍA
Nota: El control remoto
requiere un campo visual
para que la señal sea
recibida por la torre.
Coloque la torre de
forma tal que los lentes
receptores (ubicados
dentro del logo “V” de
Vornado) sean visibles
desde el control remoto.
ADVERTENCIA: Este producto contiene una pila de botón. Si
se ingiere, podría causar lesiones graves o la muerte en solo 2 horas.
Busque atención médica de inmediato.
TEMPORIZADOR OSCILACIÓN
ENCENDIDO/APAGADO y
AJUSTE DE VELOCIDAD
5
English
SAFE USE WARNING—To reduce risk of fi re, electrical shock and
injury to persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fi re and electric
shock, do not operate with a solid state speed device, such as a
dimmer control switch.
- Do not operate any fan with a damaged cord or plug. Discard fan or
return to an authorized service facility for examination and/or repair.
- Do not operate unit if the unit has been dropped or damaged. Do
not use this product if it has a damaged power cord or plug. To
avoid risk of electrical shock, do not attempt to repair or replace
parts. Only original replacement parts may be used. If the power
cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualifi ed persons in order to avoid a
hazard. Contact Vornado Consumer Service at 1-800-234-0604
(phone) or [e-mail] (email) for further
instructions about replacement and repair.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet’s power supply.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or stretch
the power cord.
- While the product is plugged in, do not insert or allow foreign
objects to enter any input or output opening as this may cause risk
of electric shock or fi re, or damage the product.
- A loose fi t between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the
product in this outlet. Contact a qualifi ed electrician to replace
loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the
other.) To reduce the risk of electric shock, this plug is intended to
fi t in a polarized outlet only one way. If the plug does not fi t fully in
the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed
electrician. Do not attempt to defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when not in
use, use the product controls to turn off the power and then unplug.
To disconnect from outlet, grasp and pull only the plug. Also, power
off and unplug if the product will be left unattended for an extended
period of time or during electrical storms.
SERVICING WARNING—To reduce risk of fi re, electrical shock
and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this manual.
Prior to cleaning, turn off the power on your product and unplug. Do
not use gasoline, thinners, solvents, ammonias or other chemicals
for cleaning. Refer to the CLEANING instructions provided.
- Do not open appliance housing. To avoid risk of shock, all
service and/or repairs must be done by a Vornado Authorized
Service Center.
- This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating)
and check the product. If the replacement fuse blows, a short-circuit
may be present and the product should be discarded or returned to
an authorized service facility for examination and/or repair.
User Servicing Instructions
1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as
approved by Vornado Consumer Service. For an authorized
replacement fuse, please contact Vornado Consumer Service.