Operation Manual

5
English
Discard fan or return to an authorized service facility for
examination and/or repair. Do not operate unit if it has been
dropped or is damage is apparent to any part of the unit.
To avoid risk of electrical shock, do not attempt to repair
or replace parts. Only original replacement parts may be
used. Contact Vornado Consumer Service at 1-800-234-0604
(phone) or [e-mail] (email) for further
instructions about replacement and repair.
- Risk of re. Your appliance may be equipped with a
detachable power supply or a cord/plug with a safety device
such as a fuse. Use only the power cord and plug provided.
- Before plugging power cord into electrical outlet, be sure
that all electrical information on the rating label, including
voltage, is compatible with your outlet’s power supply.
- Never use the cord as a handle or otherwise yank, strain or
stretch the power cord.
- While the product is plugged in, do not insert or allow
foreign objects to enter any input or output opening as
this may cause risk of electric shock or re, or damage the
product.
- A loose t between wall outlet (receptacle) and plug may
cause overheating and distortion of the plug. Discontinue use
of the product in this outlet. Contact a qualied electrician to
replace loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do not attempt to
defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when
not in use, use the product controls to turn off the power
and then unplug. To disconnect from outlet, grasp and pull
only the plug. Also, power off and unplug if the product will
be left unattended for an extended period of time or during
electrical storms.
SERVICING WARNING—To reduce risk of re, electrical
shock and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this
manual. Prior to cleaning, turn off the power on your
product and unplug. Do not use gasoline, thinners, solvents,
ammonias or other chemicals for cleaning. Refer to the
CLEANING instructions provided.
- Do not open appliance housing. To avoid risk of shock, all
service and/or repairs must be done by a Vornado Authorized
Service Center.
- This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the
fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions (follow product
marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and
the product should be discarded or returned to an authorized
service facility for examination and/or repair.