Specifications

5
Before First Time Use
Your Vornado humidifier comes fully assembled and ready to
use after one simple step.
Check For Leaks
Your new humidifier uses a sizable volume of water, so we
recommend checking the base and water bottle(s) for any
shipping damage that may cause leaks. Please note a visual
inspection may not reveal hairline fractures.
To check for leaks:
• Place humidifier on a water-resistant surface.
• Remove only water bottle(s) and power head. Bottle(s) are
removed by placing your hand on top of the bottle and
rotating it outward. The power head is removed by pulling
this piece straight up.
• Pour several cups of water in the base of the unit and
inspect for leaks. Fill the water bottle(s) and inspect
for leaks.
Not Leaking?
Dump water, replace power head, and proceed to the
following operating instructions. Make certain the filter(s)
are in the proper position lying at an angle along the open
grill, inside of the base.
Leaking?
In the slight chance your
humidifier may have leaks,
contact Vornado Consumer
Services and we will
immediately replace these
parts. 1-800-234-0604
(8:30am-5pm CST) or email:
[e-mail]
SIMPLE TO CLEAN
8
Replacing Filter(s)
Filter Deterioration
We recommend replacing filter(s) when you can no longer maintain
desired humidity levels, usually when filter becomes hard and
discolored. Check filter(s) periodically before refilling.
Filter Replacement
Vornado® disposable filter(s) are hassle-free. Simply use and
discard, no cleaning required. When you are ready for replacement
filter(s), use only Vornado® filter(s). While other brands may fit
our units, these filter(s) do not carry the same quality and
performance as our own and can diminish performance of the
humidifier.
Find our filter(s) at many fine retailers or order direct from Vornado:
1-800-234-0604 or
www.vornado.com
Step 1
Turn the humidifier
OFF and UNPLUG the unit.
Step 2
Remove the power head
carefully.
Step 3
Remove and discard
used filter(s).
Step 4
Replace with new filter(s),
laying them at an angle along the
open grill, inside of the base.
Step 5
Replace power head,
making sure it’s properly
aligned with the base.
VORNADO FILTERS