Specifications

10 3
Important Information
• Never pour water through the top outlet air grill
on the Power Head.
• Do not repeatedly tip the water bottle(s) in and out of
position. This will overfill the base reservoir and water
will spill out.
• Do not store the humidifier with wet filter(s). If the filter(s)
are suitable for future use, remove the water bottle(s),
empty water in the base and bottle(s), replace the bottle(s),
turn the fan power speed knob to the highest fan speed
and allow the unit to run until the filter(s) dry.
• If the humidifier is to be turned off and left for more
than 12 hours, the water should be emptied from the unit
as leaving the water will encourage the growth of algae
or bacteria. If this happens, disassemble the unit and
thoroughly clean and disinfect the unit and the filters.
(Refer to CLEANING and DISINFECTING instructions.)
• If you need to move the humidifier to another location,
we recommend removing the water bottle(s) first.
• Always unplug the unit before cleaning or removing
the power head.
• Use only water or a 50/50 solution of water and vinegar
to clean your humidifier. Do not use undiluted bleach
or ammonia, abrasive cleansers, gasoline, paint thinner
or other solvents to clean the humidifier.
• The power head contains no user serviceable parts. If
you experience a problem, please see the warranty
for information. DO NOT ATTEMPT TO
DISASSEMBLE. DOING SO WILL VOID YOUR
WARRANTY AND COULD CAUSE DAMAGE
AND/OR PERSONAL INJURY.
If you have any questions regarding this product,
please call Vornado Consumer Services, toll-free at
1-800-234-0604, weekdays, (8:30am-5pm CST)
or email [e-mail]
Disinfecting
Perform this operation several times during the season.
Step 1 Turn the humidifier OFF and UNPLUG the unit.
Step 2 Fill the base with water and add one teaspoon of
chlorine bleach. Fill the water bottle(s) 3/4 full with water
and add 2 teaspoons of chlorine bleach to each bottle.
Let the solutions stand for 20 minutes, swishing every
few minutes. Disinfect only the base and water bottle(s),
DO NOT USE BLEACH ON THE POWER HEAD.
Step 3 Empty the base and water bottle(s) and rinse with
water until the bleach smell is gone. Dry the base with a
clean cloth or paper towel. Never use soaps or detergents.
Step 4 Reinstall power head and the water bottle(s). For
proper operation, the power head, base and water bottle(s)
must be properly aligned.
Storage
Step 1 Clean and dry the humidifier thoroughly per the
CLEANING instructions.
Step 2 Be sure all components are dry. Do not leave
any water in the humidifier when storing. Water left in the
humidifier may leave mineral deposits or allow mold, fungus
or bacteria to grow.
Step 3 Dispose of the old filter(s) if they are not suitable
for reuse. Do not store the humidifier with wet filters . If the
filters are suitable for future use, remove and empty water
from the base and water bottle(s), replace the water bottle(s),
turn the power knob to the high fan speed and allow the
unit to run until the filter(s) are completely dry.
Step 4 Place the humidifier in its original plastic bag and
carton and store it in a cool dry place.
Step 5 Purchase your new Vornado filter(s) now so your
humidifier will be ready for your next use.