Use and Care Manual

6
|
ENGLISH
Models 510, 530, 610, 630, 715,
723, 733, 783, 735, 745, 795 •
Remove the screw (only neces-
sary on 530 model.) Depress the
grill clips by placing your thumbs
against the outside surface of
the clips and pressing downward
towards the motor, applying slight
pressure forward. A flathead
screwdriver can also be used if the
clips are difficult to release. Usu-
ally by releasing one clip, the grill
can be removed. If the grill cannot
be removed, repeat the process on
a second clip. Replace by lining up
the clips with the holes and firmly
snapping the grill back into place.
Replace the screw.
510, 530, 610, 630,
715, 723, 733, 783,
735, 745, 795
Models 573, 673, 679 • Remove
the 8 screws around the perimeter
of the frame and lift off. To reinstall
the grill, line up screw holes and
replace screws.
573, 673, 679
Model 360 • Remove the 2 screws
located in between the ribs of the
inlet grill at roughly 9 and 3 o’clock
positions, releasing the grill. To
reattach – position grill so the logo
in the center of the grill is straight
and replace the 2 screws.
Grill Removal
Unplug the Air Circulator before removing the grill.
Models V102, 270 • Remove the
screw located at the 6 o’clock
position. Rotate the grill counter-
clockwise to unlock and then lift off.
To reinstall the grill, position the
grill with the logo slightly turned to
the left and rotate clockwise.
Replace the screw.
Models 533, 633, 753 • Remove
the 3 screws located in between
the ribs of the inlet grill at roughly
10, 2, and 6 o’clock positions. (Do
Not remove the 2 screws on the
pivot arms.) Place the circulator
facing you. Position your hands at
the 10 and 2 o’clock positions, lift
up and back on the outer grill to
release the grill clips. Repeat the
process against the remaining
two clips. Replace by lining up
the clips with the holes and firmly
snapping the grill back into place.
Replace the screws.
Model 660 • Remove screw on
the bottom of the head of the unit
on the left side of the chrome glide
bar. Depress the 3 buttons to
release the grill. Replace by lining
up the buttons with the holes and
firmly snapping the grill back into
place. Replace the screw.
660
V102, 270
533, 633, 753
360