Use And Care Manual
English
15
HOW TO CLEAN
Because large volumes of air pass through your Vornado Air Purier
each day, it will need regular cleaning.
1. Unplug the unit before cleaning.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
2. Wipe down with a soft, damp cloth. (Figure 1)
3. Dust or vacuum the interior and along the sides. It is recommended
to clean the interior when the Filters are changed. (Figure 2)
CLEANING THE DUST SENSOR
It is recommended to clean the Dust Sensor when replacing the Car-
bon Filters.
1. Unplug the unit before cleaning.
2. Locate the Dust Sensor Access Door on the right side of the unit.
(Figure 1)
3. Open Dust Sensor Access Door.
4. Gently wipe the surface of the Dust Sensor with a cotton swab.
(Figure 2)
5. Once cleaned, close Dust Sensor Access Door.
Other Maintenance
The motor is permanently lubricated so it needs no service. No other
serviceable parts, other than Filters, are contained within the unit.
Fig. 1 Fig. 2
Fig. 1 Fig. 2
CLEANING AND MAINTENANCE