Use And Care Manual
14 English
7. To reset the CARBON lter notication - press and hold
the SLEEP button for 3 seconds. To reset the HEPA lter
notication, press and hold the AUTO button for 3 seconds. The
light will turn off conrming the indicator is reset.
Note: Do not operate the Air Purier without Vornado Carbon and
Vornado HEPA Filters in place.
Press for
3 seconds.
Press for
3 seconds.
SAFETY SHUT-OFF FEATURE
For your protection, the unit is designed to operate only if the Front
Panel is in place. Do not attempt to override this safety feature. If,
after the Front Panel has been reinstalled, the unit does not operate,
remove and reinstall the Front Panel to assure proper placement.
6. Replace Front Panel by positioning the Panel slightly above the unit
and aligning the tabs of the Front Panel with the holes in the unit
(A). Gently press the Front Panel down, sliding into the tab slots
and allowing the magnets to securely lock the Front Panel in place.
Follow the steps listed below when you are ready to store your unit.
1. Unplug power cord and bundle loosely.
2. Lift unit with both hands, using hand holds. (Refer to USER TIPS)
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
STORAGE
±
±
±
A
FILTER REPLACEMENT