Use And Care Manual

English

5. Replace the Plastic Support Filter Frame by securing the bottom

2 tabs into bottom slots (B). Slightly ex the Plastic Support Filter

Frame to secure the top 2 tabs into the top slots (A).

4. Remove and discard the Filters you wish to replace. To remove

the Carbon Filter, take hold of the Filter at any place along the

perimeter and remove. Repeat on the second Filter. To remove

the HEPA Filter, after the Carbon Filters have been removed,

take hold of the tab (Figure 1) and pull to release. Repeat on the

second Filter. Replace with genuine Vornado Filters. Place the

Filters in the unit and gently press around the perimeter of the

Filter to ensure secure placement (Figure 2).

Note: The HEPA Filters must be placed in the unit before the Carbon

Filters. See Product Information for a detailed illustration.

Fig. 1

Fig. 2