Use And Care Manual

12 English
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
A
HOW TO REPLACE YOUR FILTERS
1. Unplug unit.
2. Remove Front Panel by lifting up and away from unit.
GENUINE VORNADO FILTERS ARE RECOMMENDED
Peak performance is only realized when genuine Vornado Carbon
and HEPA lters are used. Others may claim to be compatible with
Vornado units, but the Vornado Air Purier is calibrated to achieve a
99.97% capture rate of particles 0.3 microns or larger, only when used
with Vornado Filters.
3. Remove the Plastic Support Filter Frame by pulling on the center
tabs (A). You may need to ex the Plastic Support Filter Frame
slightly to release the tabs at the top and bottom.
Note: The Front Panel is held in place by magnets, you will need to
lift the Front Panel hard enough to overcome the resistance of the
magnets.
±
±
±
FILTER REPLACEMENT