User manual

VOPTech GoIP User Manual

rpt: the number of repeats (0 to infinity)

c1on: the duration when the frequency 1 is on (ms)

c1off: the duration when the frequency 1 is off (ms)

c2on: the duration when the frequency 2 is on (ms)

c2off: the duration when the frequency 2 is off (ms)

c3on: the duration when the frequency 3 is on (ms)

C3off: the duration when the frequency 3 is off (ms)

f1: the frequency of tone #1, 300 to 3000Hz

f2: the frequency of tone #2, 300 to 3000Hz

f3: the frequency of tone #3, 300 to 3000Hz

f4: the frequency of tone #4, 300 to 3000Hz

p1: the increment of tone #1, 0 to 31(0=3dB, -1dB increments)

p2: the increment of tone #2, 0 to 31(0=3dB, -1dB increments)

p3: the increment of tone #3, 0 to 31(0=3dB, -1dB increments)

p4: the increment of tone #4, 0 to 31(0=3dB, -1dB increments)

Example:

To add a prompt tone where f1 is 450Hz, c1on is 750ms, and c1off is 1000ms, enter the

following values in the corresponding boxes:

1,0,750,1000,0,0,0,0,450,0,0,0,20,0,0,0

3.4 Network Setting

Click the “Network Setting” in the menu on the left, and the following page is displayed: