User manual

VOPTech GoIP User Manual

automatic setting feature and enter the address of the server. If the service provider does not

provide the automatic setting, you need to select “Disable” to speed up the startup time of the

GoIP.

It is a special server, which needs the support of the specific system.

3.3.5 Setting of the Remote Control

Press *20# on the terminal to initiate the request to realize the remote management of

equipment. The remote control server is provided by the service provider. The default port is

1920 and the terminal is identified by the SN. The remote control password is identical with

that of the server and is set as default.

In the following figure, the remote control server is set as 118.142.51.162. The terminal user

presses *20# and a long tone is heard, which indicates that the instruction has been

successfully sent. The remote administrator access http://118.142.51.162:8086 and the model

and SN of the gateway are displayed. Click the gateway SN to set the remote gateway.

Note: It is a special server, which needs the support of the specific system. For details, please contact the

technical support of VOPTEL Technology.

3.3.6 GSM Group Mode

Users can establish a GSM group containing multiple GoIP gateways. Under this mode, the