User manual

VOPTech GoIP User Manual

2.4 SMS Instructions

Users can send instructions to the GoIP gateway through the SMS.

Function Instructions (Short

message content)

Remark

Obtain

information from

the LAN port

INFO or info Case insensitive

Reset the GoIP

setting

RESET Password The keyword RESET is case insensitive.

Reboot the GOIP

gateway

REBOOT Password The keyword REBOOT is case insensitive.

1) When “info” or “INFO” is sent to the GoIP through SMS, the GoIP will return immediately

the LAN port info to the mobile phone.

2) When performing reset/reboot through the SMS, the password authentication is required. The

password is identical with that of the admin. The detailed procedure is as follows:

a. The keyword “reset” and “reboot” is case insensitive, but the password is case sensitive.

b. When the reset instruction is sent, the GoIP will automatically reboot.

To perform reset, the admin password of GoIP user is “tengda”. Input “reset tengda” or

“RESET tengda” in the SMS to reset.

To perform reboot, the admin password of GoIP user is “tengda”. Input “reboot tengda” or

“REBOOT tengda” in the SMS to reboot.

3 Page Setting

Before setting the page, you need to have the IP address of the PC port of the gateway first.

Connect the computer for setting the gateway to the PC port of the GoIP. The GoIP gateway

has a built-in page server that is used to accept or obtain the HTTP. You can set the related

functions for the GoIP through the Internet Explorer.

3.1 Page Setting Menu

You can access the setting page of the GoIP gateway through the IP address of the LAN port

or PC port. The default factory settings are as follows:

A: The LAN port supports the DHCP (dynamic IP address). Users can dial the SIM card