User manual

VOPTech Document Four Channel’s GSM VoIP Gateway

d) Connect the power adapter provided to the power jack of the GoIP4 Gateway.

2.3 LED Indicators

The following table defines the status of the LEDS located on the top case and on the

RJ-45 connectors.

LED DESCRIPTION

P0WER When GoIP4 Working, this LED will keep

light;

RUN 1. When the GoIP4 is booting，this LED will

flash 100ms ON and 100ms OFF.

2. When the GoIP4 is login your

softswitch, this LED will flash 1s ON and

1s OFF.

LAN When LAN port connecting to network,this

LED will light and flash when has data

through this port;

PC When has devices use PC port,this LED will

light and flash;

Channel 1 When the GoIP4’s GSM channel1 login to

ISP’s system, this LED will flash 1s ON and

1s OFF;

Channel 2 When the GoIP4’s GSM channel2 login to

ISP’s system, this LED will flash 1s ON and

1s OFF;

Channel 3 When the GoIP4’s GSM channel3 login to

ISP’s system, this LED will flash 1s ON and

1s OFF;

Channel 4 When the GoIP4’s GSM channel4 login to

ISP’s system, this LED will flash 1s ON and

1s OFF;

2.4 SMS Commands

GoIP4 supported some maintenance commands come from SMS.

FUNCTION SMS CONTENT REMARK

Obtain LAN Port Info

INFO Not distinguish majuscule and lowercase

Reset device RESET Password Not distinguish majuscule and lowercase