User manual

4/8/16-CH DVR Quick Start Guide
1. Hardware installations
1.1 Install Hard Drive
Notice: 1.This series support eight SATA hard drives. Please use the hard drive the
manufacturers recommend specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting.
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the HDD onto the bottom
case as the following picture.
Step3: Screw the HDD
Note: For the convenience to install, please connect the power and
data cables firstly, and then screw to fix.
1.2 Install DVD Writer
Step1: Unscrew and Open the top cover.
Step2: Unscrew and take the barrier out of the front panel. Then connect the
power and data cables. Finally, put the DVD with the holder into the case, let
the screw holes of the case aim at the holder‟s and screw them firmly.
2. Connections
2.1 Rear view for 4-ch DVR
VOOK