User manual

4/8/16-CH DVR Quick Start Guide

Step 4: Once an alarm image has been identified, the user can double click the

image to play the recording.

You can lock the image by clicking “Lock” button. Click “Save” button to copy the

image on the HDD. Click “Save All” to copy all images on the HDD.

Note: In order to take images on alarm, the snapshot feature should be

activated in “Alarm Handling” for different kind of alarms. Please refer to Alarm

Configuration for details.

9. Back up

This unit supports backup by USB flash and USB HDD.

Step 1：Enter into MenuBackup tab.

Step 2: Set the start & end time, select channels and click Search button to

display the searched data in the data backup list box

Step 3: Select a required file or checkmark “All” to select all data files. Click

Backup button to pop up Backup information window.

Step 4: In the backup information interface, user can check the relevant options

for backing up files. These options include storage Media, backup player and

save file type. Then click Start button to start backup.

10. Remote Surveillance

In order to view the DVR from a network it must be connected to a LAN/WAN or

internet. The network setup should be done accordingly.

10.1 Access DVR on LAN

Please enter into MenuSetup Network Setup as shown below:

● Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in

both the DVR and the router. Enter into Menu  Information  Network, and

user can check the network settings of the DVR.

● Enter into Record Setup to set network video parameters like resolution, frame

VOOK